环氧树脂自流平的有哪些层面组成

一、混凝土基层。采用强度等级不小于C25的混凝土一次浇筑成型，地坪有耐压、耐冲击要求时，混凝土基层可采用双向钢筋网处理。
Concrete base. The use of strength grade is not less than C25 of a concrete casting molding, the floor has a pressure resistance, impact resistance requirements, the concrete base can be treated with two-way steel mesh.
二、环氧树脂自流平地面涂层。山东自流平环氧树脂自流平地面涂层主要由底涂层，中涂层，腻子层，面涂层组成。
Two, epoxy self leveling floor coating. Shandong self leveling epoxy self leveling floor coating is mainly composed of a bottom coating, coating, putty layer, surface coating composition.
1.底涂层，环氧底漆，采用渗透力及附着力特强环氧底漆，连续均匀涂抹成膜，无漏余，增强基层表面附着力;
1 Primer, epoxy primer, the penetration and adhesion of super strong epoxy primer, continuous coating into film, no leakage, enhance the surface adhesion;
2.中涂层，环氧砂浆层，环氧双组份加入适量100目石英砂，增强涂层表面的平整性和涂层的强度;
2 in the coating, epoxy mortar layer, epoxy two components to add the appropriate amount of 100 mesh quartz sand, enhance the coating surface smoothness and the strength of the coating;
3.腻子层，环氧腻子层，山东自流平环氧双组份加入适量腻子粉，进一步对涂层表面找平，做到表面平整，光滑;
3 coating, epoxy putty layer, Shandong self leveling two-component epoxy putty powder added, further to the leveling layer surface, make the surface smooth, smooth;
4.面涂层，涂抹色漆，自流平环氧面漆均匀镘涂。
4 surface coating, paint paint, self leveling epoxy topcoat uniform coating.